Xantrex-technology MS2000 Bedienungsanleitung PDF herunterladen (Seite 49)

Operation

975-0125-02-01 2–19

Equalizing Batteries

To equalize your batteries:

1. Turn off or disconnect all loads on the battery.

The voltage applied to the battery during equalization may damage your

electronic equipment. As well, equalization won’t proceed correctly if loads

are drawing current from the battery.

2. Check electrolyte level.

Fill with distilled water if the electrolyte level is low.

3. To request the equalization charge, ensure the Charger switch is enabled, and

then scroll to the Equalize setting on the System Control Panel.

4. In the MS2000 home menu, highlight Equalize, as shown in

Figure 2-12.

When you select On, the equalization confirmation warning appears, as shown in

Figure 2-13.

Important:

Equalization will be carried out after an absorption charge.

Equalization only runs for 60 minutes and may need to be restarted if the

specific gravity is still uneven.

Figure 2-12

Equalize On

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 125 126

Keine Kommentare

Xantrex-technology MS2000 Bedienungsanleitung Seite 49